Minneapolis, MN - (Cottage Grove, MN)
2026-07-21 - 2026-07-24 | Van Meter – Cottage Grove MN, 7450 95th Street South, Cottage Grove, MN, 55016, United States
The Electrical Level I Thermography Certification training course is geared to the new infrared camera or practicing thermographers wanting focused training primarily on electrical inspection, but also covering a variety of condition monitoring / predictive maintenance applications. Course focuses on commercial electrical systems from the building service through switchgear, bus ducts, motor control centers, electrical distribution panels, and breakers.

Training Course Benefits

Introduction to thermal imaging and measurement systems for predictive maintenance applications. No experience in thermography is necessary!
Acquire good electrical inspection safety procedures.
Recognize the typical thermal patterns associated with electrical faults. Visit our image gallery.
Collect quality data, and account for effects such as distance and emissivity using infrared cameras.
Interpret thermal images and make informed decisions by applying heat transfer and measurement concepts
learned in class
Review severity criteria used for electrical inspections.
Discuss the use of infrared windows, their placement and installation, and how to properly compensate for
transmission loss using the cameras and software.
Discuss the application of thermal imaging for inspecting and diagnosing indoor and outdoor electrical equipment:
conductors, cables, motors, bearings, solar panels, outdoor utilities, and other electrical equipment
Learn how to report your findings with infrared analysis and IR reporting software.
Avoid costly mistakes – learn to distinguish between hot spots and reflections, direct vs. indirect readings and qualitative vs. quantitative thermography.
Challenge yourself with field applications labs that closely simulate real-world infrared applications.

Download Details:
https://monroeinfrared.com/wp-content/uploads/2023/05/Level-1-Electrical-Course-Discription.pdf

Tuition
The registration fee includes course instruction & course materials. The regular tuition is $2,500. Monroe Infrared offers a $405 discount (net $2095) if you register for a class 31 days or more in advance of the class starting date and a $125 discount (net $2375) if you register for a class 30 days or less in advance of the class start date.
Required Course Materials

IR Camera– Students will be required to complete various labs & exercises throughout the duration of the course.
Laptop– Certification Examinations will be administered electronically. Tablets are also acceptable.
Accessories-Extra Batteries, charger cords, etc.
IR Reporting Software- Please have software installed prior to class. Software can be used to assist with many of the camera lab exercises.

https://www.flir.com/instruments/thermal-studio-plan-selection/
Please bring an IR camera to class if you have one. Cameras are not provided during the training course. If you do not have access to a camera you can rent one through Monroe Infrared by calling 800.221.0163. If you are attending the course with a colleague or friend, you may share a camera however we recommend no more than three students per IR camera.
Certification:
Students who complete all training course requirements receive a Level I Electrical Infrared Thermography Certification.
Learning objectives, contact hours, and written exam are based on requirements outlined by ANSI/ASNT CP-105 and CP-189 of the American Society for Non-Destructive Testing.
Accreditation:

Continuing Education Credits: ITC: 24 CEU’s
This course is eligible for 16 NETA Continuing Technical Development Credits (CTDs).

ONE TICKET BELOW EQUALS ONE STUDENT REGISTRATION

Class Hours:
If Attending In-Person Training
8AM – 5PM Local Time

Virtual - Level I Electrical Certification
2026-07-21 - 2026-07-24
The Electrical Level I Thermography Certification training course is geared to the new infrared camera or practicing thermographers wanting focused training primarily on electrical inspection, but also covering a variety of condition monitoring / predictive maintenance applications. Course focuses on commercial electrical systems from the building service through switchgear, bus ducts, motor control centers, electrical distribution panels, and breakers.
This is the same course, taught by the same expert thermography instructors, as in-person Level 1 Electrical courses, but available from your home or office.

Training Course Benefits

Introduction to thermal imaging and measurement systems for predictive maintenance applications. No experience in thermography is necessary!
Acquire good electrical inspection safety procedures.
Recognize the typical thermal patterns associated with electrical faults. Visit our image gallery.
Collect quality data, and account for effects such as distance and emissivity using infrared cameras.
Interpret thermal images and make informed decisions by applying heat transfer and measurement concepts
learned in class
Review severity criteria used for electrical inspections.
Discuss the use of infrared windows, their placement and installation, and how to properly compensate for
transmission loss using the cameras and software.
Discuss the application of thermal imaging for inspecting and diagnosing indoor and outdoor electrical equipment:
conductors, cables, motors, bearings, solar panels, outdoor utilities, and other electrical equipment
Learn how to report your findings with infrared analysis and IR reporting software.
Avoid costly mistakes – learn to distinguish between hot spots and reflections, direct vs. indirect readings and qualitative vs. quantitative thermography.
Challenge yourself with field applications labs that closely simulate real-world infrared applications.

Download Details:
https://monroeinfrared.com/wp-content/uploads/2023/05/Level-1-Electrical-Course-Discription.pdf

Tuition
The registration fee includes course instruction & course materials. The regular tuition is $2,500. Monroe Infrared offers a $405 discount (net $2095) if you register for a class 31 days or more in advance of the class starting date and a $125 discount (net $2375) if you register for a class 30 days or less in advance of the class start date.
Required Course Materials

IR Camera– Students will be required to complete various labs & exercises throughout the duration of the course.
Laptop– Certification Examinations will be administered electronically. Tablets are also acceptable.
Accessories-Extra Batteries, charger cords, etc.
IR Reporting Software- Please have software installed prior to class. Software can be used to assist with many of the camera lab exercises.

https://www.flir.com/instruments/thermal-studio-plan-selection/
Please bring an IR camera to class if you have one. Cameras are not provided during the training course. If you do not have access to a camera you can rent one through Monroe Infrared by calling 800.221.0163. If you are attending the course with a colleague or friend, you may share a camera however we recommend no more than three students per IR camera.
Certification:
Students who complete all training course requirements receive a Level I Electrical Infrared Thermography Certification.
Learning objectives, contact hours, and written exam are based on requirements outlined by ANSI/ASNT CP-105 and CP-189 of the American Society for Non-Destructive Testing.
Accreditation:

Continuing Education Credits: ITC: 24 CEU’s
This course is eligible for 16 NETA Continuing Technical Development Credits (CTDs).

ONE TICKET BELOW EQUALS ONE STUDENT REGISTRATION

Class Hours:
If Attending Virtual Classroom
9:30AM – 6PM ET Eastern Standard Time

Denver, CO
2026-07-21 - 2026-07-24 | IPS – Denver Service Center (Kingston), 4900 Kingston St, Denver, 80239, United States
The Level I Infrared Thermography Training Course is for the new thermographer and focuses on using infrared in a variety of applications. Learn all the essentials of camera operation, heat transfer and report writing.

Infrared Course Benefits
No previous thermography experience or IR camera is required.

Comprehensive, hands-on introduction to thermal imaging and measurement systems for predictive maintenance applications. No experience in thermography is necessary!
Collect quality data, accurate temperature readings, and account for measurement effects such as distance and emissivity using infrared cameras.
Interpret thermograms and make informed decisions using heat transfer concepts to analyze thermal images, and see the latest in infrared inspection report generation and database software.
Avoid costly mistakes – learn to distinguish between hot spots and reflections, direct vs. indirect readings and qualitative vs. quantitative thermography.
Challenge yourself with field applications labs that closely simulate real-world infrared applications.

Download Syllabus:
https://monroeinfrared.com/wp-content/uploads/2024/01/Level-1-Syllabus.pdf
Tuition
The registration fee includes course instruction & course materials. The regular tuition is $2,500. Monroe Infrared offers a $405 discount (net $2095) if you register for a class 31 days or more in advance of the class starting date and a $125 discount (net $2375) if you register for a class 30 days or less in advance of the class start date.
Required Course Materials

IR Camera– Students will be required to complete various labs & exercises throughout the duration of the course.
Laptop– Certification Examinations will be administered electronically. Tablets are also acceptable.
Accessories-Extra Batteries, charger cords, etc.
IR Reporting Software- Please have software installed prior to class. Software can be used to assist with many of the camera lab exercises.

https://www.flir.com/instruments/thermal-studio-plan-selection/
Please bring an IR camera to class if you have one. Cameras are not provided during the training course. If you do not have access to a camera you can rent one through Monroe Infrared by calling 800.221.0163. If you are attending the course with a colleague or friend, you may share a camera however we recommend no more than three students per IR camera.
CERTIFICATION / ACCREDITATION
The learning objectives, contact hours, and written exam of ITC’s Level I course are based on the requirements outlined by ANSI/ASNT CP-105 of the American Society for Non-Destructive Testing. As such, this course is suitable for use by your employer to certify you under ASNT’s Recommended Practice No. SNT-TC-1A provided it is consistent with your employer’s Written Practice.
• 32 hours (24 ITC certification renewal credits)
• Building Performance Institute, Inc. has approved this course for 16.5 BPI continuing education units.
• InterNACHI approved for 32 CEU’s.
• This course is eligible for 32 NETA Continuing Technical Development Credits (CTDs).
Class Hours:
If Attending In-Person Training
8AM – 5PM Local Time
NOTE BELOW – ONE TICKET MEANS ONE CLASS REGISTRATION SEAT

Virtual - Level 2 Certification
2026-07-21 - 2026-07-24
The Level 2 infrared thermography training course is for Level 1 certified thermography professionals with 6 months of experience or more, seeking to broaden their knowledge of infrared. This course focuses on strengthening and improving your imaging and temperature measurement skills. ITC will be teaching this industry-standard Thermography certification class on-line. This is the same course taught by the same expert thermography instructors, as in-person Level 2 courses, but available from your home or office.
Must have completed Level 1 and provide copy of Level 1 Certificate.

Infrared Training Course Benefits

Reinforce Level I infrared training concepts with refresher material covering the latest infrared camera, technology and thermal imaging application developments.
Discuss the importance of resolution, optics, and other important camera settings to consider when performing a Thermography inspection.
Avoid costly mistakes – ITC experts review and explain the common misconceptions and misapplications of infrared thermography.
Expanded knowledge of heat transfer theory that will enhance your ability to analyze thermal anomalies across a variety of applications and conditions
Refine your image analysis and interpretation proficiency with in-depth thermal imaging survey and measurement techniques for predictive maintenance applications. Visit our image gallery.
Advanced radiometric concepts of emissivity and reflectivity that will hone your temperature measurement skills
Improve your thermal analysis skills with more challenging laboratory and infrared field applications labs.

Download Syllabus:
https://monroeinfrared.com/wp-content/uploads/2024/01/Level-2-Syllabus.pdf
Tuition
The registration fee includes course instruction & course materials. The regular tuition is $2,500. Monroe Infrared offers a $405 discount (net $2095) if you register for a class 31 days or more in advance of the class starting date and a $125 discount (net $2375) if you register for a class 30 days or less in advance of the class start date.
Required Course Materials

IR Camera– Students will be required to complete various labs & exercises throughout the duration of the course.
Laptop– Certification Examinations will be administered electronically. Tablets are also acceptable.
Accessories-Extra Batteries, charger cords, etc.
IR Reporting Software- Please have software installed prior to class. Software can be used to assist with many of the camera lab exercises.

https://www.flir.com/instruments/thermal-studio-plan-selection/
Certification/ Accreditation
The learning objectives, contact hours, and written exam of ITC’s Level II course are based on the requirements outlined by ANSI/ASNT CP-105 of the American Society for Non-Destructive Testing. As such, this course is suitable for use by your employer to certify you under ASNT’s Recommended Practice No. SNT-TC-1A provided it is consistent with your employer’s Written Practice.
This 32-hour course is approved for 32 NETA CTDs.
Prerequisites
Level I Thermography course certification is required. Please send a copy to: training@monroeinfrared.com.

ONE TICKET BELOW EQUALS ONE STUDENT REGISTRATION

Class Hours:
If Attending Virtual Training
9:30 AM – 6 PM Eastern Standard Time
